I’ve been long frustrated with the machines on the market. You have to buy several machines to do everything you might want to do. I tried to get several manufacturers to add a machine to my specs with no luck, so I’ve decided to do it myself.
The first machine I plan on building is the “VAC-EAC1“. It will have all of the functionality an acupuncturist would want except no Ryodoraku Dx and only frequency selection from 1-999Hz. It will have a selection of output intensity for needle to needle, needle to electrode pad (to do my anti-inflammation treatment), and electrode pad to electrode pad (to do TENS, EMS and FSM treatments. For all of the intensity settings, you can choose the following: Continuous stimulation (F1 to outputs 1&2 and F2 to outputs 3&4 so you can also do Inferential), Intermittent (on for time selected (3 seconds for “Han” type treatments, 10 seconds for EMS treatments). I have also designed it so the stimulation will alternate between outputs 1&2 and 3&4 so you can alternate between stimulating flexors and extensors when doing EMS. You will also be able to do “dense-Disperse where the stimulation alternates between F1 and F2 (I would typically use 3 seconds for “Han”). Then there’s two settings unique to my machine. One is a frequency ramp to help in muscle rehab, and the other is D.C. for dc treatments and light therapy(always on for healing).